A burner that clicks and never catches, a coil glowing on only one setting or an induction zone ignoring your pan? A Grapevine technician stops by, figures out what quit and has every burner cooking again.
Grapevine, Texas
Gas, electric or induction, these six cooktop problems bring us into Grapevine kitchens most often. Each card lists where our checks begin.
A spark igniter cracked from heat, a crooked burner cap or ports clogged with boiled-over food.
Usual suspectsSpark igniter, burner cap, burner head
Moisture under the cooktop after cleaning or a spark switch that is stuck in the knob.
Usual suspectsSpark switch, spark module, igniter wire
A burned-out element, a scorched terminal block or an infinite switch that no longer sends power.
Usual suspectsSurface element, terminal block, infinite switch
The infinite switch has welded itself closed, which keeps the element running at full power.
Usual suspectsInfinite switch, control knob, wiring
Cookware that is not magnetic, a failed power board or a zone sensor that is reading wrong.
Usual suspectsPower board, zone sensor, cooling fan
Clogged burner ports, a pressure regulator issue or an air shutter that needs adjusting.
Usual suspectsBurner ports, pressure regulator, air shutter
Stove Types We Fix
Everyday names and high-end labels alike. If your appliance wears one of these badges, our technicians have opened plenty just like it.
Electronic and induction cooktops flash a code when they sense trouble. Look up the one on your display below.
Pan not detected
The cookware is the wrong size, off-center or not magnetic. Use a matching pan on that zone.
Try this firstCooktop in use
Shows up when self-clean starts with a burner still on. Turn every burner off first.
Try this firstPower connection issue
The power connection is not wired in correctly and needs a professional check.
Call a technicianCommunication error
Electronic components inside have stopped communicating with each other.
Call a technicianCookware problem
The pan is too small, off-center or non-magnetic. Center a magnetic pan on the ring.
Try this firstLow supply voltage
The voltage coming into the cooktop is too low for it to work properly.
Call a technicianElement sensor too hot
The sensor under the left front zone reports heat beyond its limit.
Call a technicianMemory check failed
The control could not read its stored data and needs testing.
Call a technicianCode missing from the signs, or stubborn enough to stay on after a restart? We will sort it out in person.
Messages Grapevine families sent after dinner was back on the stovetop.
Both front gas burners just clicked and clicked without ever lighting.
He replaced a cracked igniter, cleaned the other burner and taught me to seat the caps right. All four light instantly now.
Our smooth top had a burner stuck on high with no way to turn it down.
Bad infinite switch, replaced before the hour was up. Felt safe cooking again the same night.
Induction cooktop kept flashing at me no matter what pan I used.
After testing it he replaced the power board and explained which of my pans actually work on induction. Very patient.
Check these in order. Say yes and move one box lower. Say no and there is an easy step to try.
Do the other burners work normally?
If none work, reset the breaker for the range, and on gas models confirm the supply valve is open.
Is the burner cap sitting flat and centered?
Lift the cap, wipe the head and set it back so it sits level with no gap.
Are the burner ports clear of food?
Once cool, scrub the ports using a dry toothbrush and a pin for stubborn spots.
Is your pan right for this burner?
Match the pan to the size of the zone, and use magnetic cookware on induction.
Still not heating after all four?
Certified and insured stove techs will diagnose it and get it cooking again.
Tell us which machine is giving you trouble and who made it. Our office rings back to lock in a visit time, and your technician brings the replacement parts that model tends to need.
Service Request
Thank You!
Your message has been sent successfully. We'll get back to you shortly.
Thank You!
Your message has been sent successfully. We'll get back to you shortly.
